Speed Change Pallet System
|
The Speed Change Pallet System (SCPS) family of products is a complete workholding solution designed to eliminate bottlenecks by allowing more parts to be held and moved in and out of the machine faster than any other workholding method. The universal Base (pictured left) accepts four standard sizes of pallets (also known as fixture plates). The system is operated by standard shop air, spring powered with 3000 lbs of locking force and repeatability of .0003". This manual pallet changer simultaneously improves productivity and reduces labor. |
 |
Vacuum Chuck SmartVac II
 |
The SmartVac II Workholding System is a simple and streamlined approach to vacuum chuck workholding. Not only does it NOT require an expensive and cumbersome vacuum pump, but the system also uses removable top plates to easily create custom fixtures for small or irregular parts. Plus, the system has the ability to link multiple bases and control them from a single control. No pump, no hassles, no brainer. |
|
The Speed Hammer
 |
Not ready to take the plunge into high production workholding? Check out the Speed Hammer - designed to improve vise efficiency by combining two of the most common tools used by machinists: a speed handle and a mallet for seating parts. Absolutely a must-have tool for smaller parts that require a delicate touch. |
|
The Smart Jaw
 |
Why use aluminum soft jaws that only have one useable side and take too much time to install? The Smart Jaw ends the insanity. Now, you'll have four usable sides per jaw with the ability to quickly slide and flip the jaws on and off. Download the FREE drawing for this product and make as many sets of soft jaws for your workholding needs.
Limited Time Free Drawing Download |
