Have you ever searched your entire shop for threaded bar for your current stops and still never found any? Are you tired of fumbling with two box wrenches just to make a simple adjustment? These small time stealing bottlenecks will kill your shop's profitability through higher setup costs. Every action you can take to streamline the process will yield higher profits, better efficiency and far less frustration. Adjusting the Smart Stop is simple and fast. Say goodbye to fumbling with wrenches and threaded bar.
The Cup Point setscrews aggressively bite into the Aluminum creating an extremely rigid stop. The threaded bar and locknut design of typical stops is overkill. It's an old design and was never meant to be user friendly. Our Smart Stops have been used in shops for years with no performance issues.
Easy. All you have to do is use a larger diameter of barstock you have laying around the shop and turn one end down to .500". Insert the end into the Smart Stop body and you're now ready to stop that part. The supplied dowel that ships with the Smart Stop can also be turned down to accomodate a smaller part.
All of our products can be purchased directly through us.
This allows us to establish a close relationship with our customers and provide the best applicaton advice possible. Please visit our workholding store give us a call to place an order at (800)
352-2894. We accept all major credit cards and company checks.